9 Air Conditioning (AC) courses

Draft and sew a circle skirt at Stitching Kitchen - one day workshop

OFTEC Domestic Oil Course (Initial)

Domestic Oil (aka OFTEC Courses)

Renew your solid fuel certificate whether you're HETA, BPEC, OFTEC, or C&G! Become a solid fuel installer & servicer today!

Automatic driving lessons with friendly, patient, experienced and fully qualified male and female driving instructors. Our current Automatic teaching vehicle is a Nissan Micra, which our students have again found has a simple logical layout and is easy to control with good all round visibility when driving, that is why we feel it is ideal as a learning car.

This course is suitable for Solid Fuel engineers who are looking to re-new their previous certification. Our Initial course is available through this link: https://www.citytraining.com/w/courses/21-solid-fuel-initial Dry - 1 Day Wet - 2 Days Our courses are accredited by OFTEC [https://www.oftec.org/technicians/areas-of-registration/solid-fuel-registration] and certified by Cert-ain [http://www.cert-ain.com/solid-fuel.html], but this does not stop you from renewing or achieving accreditation from HETAS and similar bodies, saving you money on training costs too. What's included? * Dry * OFT15-108(D) - Installation, commissioning, and servicing of solid fuel burning appliances (dry space heating). * OFT18-108(S) - Service, maintenance, repair, or commissioning of solid fuel burning appliances. * Wet * As above [OFT15-108(D) & OFT18-108(S)]. * OFT15-108(W) - Installation, commissioning, and servicing of solid fuel burning appliances with space heating and hot water heating. PREREQUISITES Category 1 - RENEWAL (this course) Applicants in this category are regarded as experienced Solid Fuel technicians holding one of the following - they will need to provide an original certificate as evidence to the Assessment Centre prior to taking OFTEC assessments:  * OFTEC       * OFT15-108D (category 1 status for OFT15-108D and OFT18-108S)  * OFT15-108W (category 1 status for OFT15-108W, OFT15-108D and OFT18-108S)  * OFT18-108S (category 1 status for OFT18-108S only)  * HETAS  * H003 AND H006 (category 1 status for OFT15-108D and OFT18-108S)  * H004 AND H006 (category 1 status for OFT15-108W, OFT15-108D and OFT18-108S) * H005 (category 1 status for OFT15-108W, OFT15-108D and OFT18-108S)  * H009 (category 1 status for OFT18-108S only)  * BPEC         * Solid Fuel Installer (category 1 status for OFT15-108W, OFT15-108D and OFT18-108S) * CITY & GUILDS     * Level 3 NVQ Diploma in Domestic Plumbing and Heating (6189) - must include Solid Fuel pathway (category 1 status for OFT15-108W, OFT15-108D and OFT18-108S) * Level 3 Diploma in Plumbing and Domestic Heating (9189-03) - must include Solid Fuel pathway (category 1 status for OFT15-108W, OFT15-108D and OFT18-108S)  Category 2 (Heating Engineer - Other Fuel) - (Initial Only)Applicants in this category are regarded as holding a nationally recognised qualification in a trade associated with Solid Fuel work; candidates must provide relevant qualifications to support entry: For those looking to expand into Solid Fuel, please visit our Solid Fuel Initial page! * Dry * OFTEC technician with scope of work categories 101,102 or 105E * or - Registered Gas Safe or RGII operative * or - Registered member of GOMCS, APICS, NACS, NIACS, CSAI, ICS, CSA or NACE * or - evidence of formal qualifications: City & Guilds 6129/6035 and 6089, or QCF 6189; * or - (United Kingdom) N/SVQ Level 2/3 in plumbing or equivalent earlier certification that provides evidence of competence * or - (Republic of Ireland) FETAC Level 5 in plumbing * or - HETAS H003 Dry Appliance Installer course * or - BPEC Solid Fuel Installer or Solid Biomass course * or - APHC Installation of Solid Fuel Appliances and Heating Systems Fed by Solid Fuel in Domestic Appliances course * or have relevant qualifications, skills and experience gained from working in a related trade such as Plumbing / Heating / Ventilation / Refrigeration / Air-Conditioning / Gas Fitting or servicing. Applicants must provide evidence of this related experience to the Assessment Centre. The evidence must consist of, as a minimum, the following: * Name and address of the business(s) providing the related experience. * The types of related work undertaken (minimum 4/5 jobs). * Wet * Compulsory: OFTEC OFT15-108D AND * (United Kingdom) - N/SVQ Level 2/3 in plumbing or equivalent earlier certification that provides evidence of competence * (Republic of Ireland) - FETAC Level 6 in plumbing * or - evidence of OFTEC 101 or 105E; * or - evidence of formal qualifications: City & Guilds 6035 and 6089, or QCF 6189; * or - HETAS H004 Wet Appliance Installer course * or - BPEC Solid Biomass course * or - Gas Safe Registered Operative holding a current CENWAT category * or - RGII Registered Operative holding a current GID category All Category 2 candidates must also undertake training at an OFTEC approved training centre. The training must consist of training utilising the current OFTEC Technical Book. The possession of the OFTEC Technical Book prior to training and subsequent assessment is mandatory. Category 3 (New to Industry - Dry Only) - (Initial Only) Applicants in this category are regarded as new to the Solid Fuel industry, and do not hold any national qualifications in a related field nor have any related work experience. Application conditions for this category require that the Category 3 applicant must obtain experience with a business which is willing to provide an auditable extended Solid Fuel training programme incorporating both On and Off the Job components with organisational support prior to the applicant taking OFTEC training and assessment. Evidence of the contents of the programme detailing the Off the Job training and On the Job experience must be presented to the Assessment Centre as above. 4 to 5 jobs are required as a minimum for your portfolio.

Manual driving lessons with friendly, patient, experienced and fully qualified male and female driving instructors.

The 1 day IMI award in “Automotive Refrigerant Handling” has been specifically designed to provide the knowledge, training and qualification necessary to satisfy EU legislation in the mobile air conditioning market. It is designed for anyone handling refrigerants within the automotive industry including mobile mechanics, garages, body shops, main dealerships and automotive dismantlers. COURSE DETAILS: * Half day classroom based theory session * Half day workshop practice and assessment session COURSE FEES £290.00 + VAT. per person *Please contact us for group rates and onsite training COURSE CONTENT THEORETICAL * Introduction to Automotive Air Conditioning * Basic heat processes * Pressure and temperature relationships * The refrigeration cycle * Lubrication * How a MAC system works * The electrical components * Types of Refrigerants used * The Environmental Impact * Regulations * Service Equipment   PRACTICAL * Health & Safety Precautions and PPE * System Inspection and Testing * Refrigerant Recovery * Refrigerant Re-charge   IMI ASSESSMENT AND TEST * An online multi-choice theory question paper * Practical Assessment observed by an IMI approved assessor. WHAT’S INCLUDED                  * Fully qualified and experienced trainers * Course booklet (normally sent out as pre-reading before the course) * Examinations Fees and Certification To find out more, please use the live chat function, visit our contact page or call us on 024 76325880

To provide a fundamental understanding of building services in the context of: * The working environment * The success of the core business * The health and safety of the occupants * Operating cost and environmental impact * The optimisation of cost and value * Strategies for continuous improvement DAY ONE 1 BUILDING SERVICES FUNDAMENTALS * The function of services in commercial buildings and their importance to the core business * Electrical services * Lighting * Heating * Ventilation and air conditioning * Lifts * Water * Understanding IT and communication systems * Practical exercises 2 THE PROVISION OF COMFORT AND SAFETY * Statutory requirements * Health and safety legislation * Control of contractors * Risk assessment * Fire precautions * Legionella, sick building and other risks * Business requirements * Understanding user requirements * Matching systems to business needs * Practical exercises 3 GETTING THE DESIGN RIGHT * What the FM needs to know about design and its procurement * Successful space planning * Relationship between services, space planning and design * Getting the brief right * Supplier selection and management * Practical exercises DAY TWO 4 OPERATION AND MAINTENANCE * Why maintain? * Maintenance contracts * Input and output specifications * Resource options * Contracts - principal elements * Tendering - key steps * Selection criteria * Operational criteria * Maintenance trends * Performance-based service provision * Input and output specifications * KPIs and thresholds * Risk containment * Value-add opportunities * Performance contract strategy * Practical exercises 5 CONTINGENCY PLANNING * Being ready for the unexpected * Identifying and reducing risk * Internal risks * External risks * Identifying threats at your site * Managing risk * Protective systems * Occupier obligations * Fire management * Testing * Practical exercises 6 COMMISSIONING SERVICES SYSTEMS * Physical commissioning * Common problems * Typical costs * Commissioning stages * Continuous commissioning * Energy efficiency and the scope for environmental improvement * Practical exercises 7 SATISFYING THE OCCUPANTS * Obtaining and responding to feedback * When to get feedback * Why * How * What to do with it * Practical exercises 8 'AIR TIME' * Sharing experience and addressing specific issues of interest to participants * Course review * Close