18 Business Administration courses

There are multiple steps and proven strategies that will help you write your Business Administration thesis impressively.

Level 7 MBA programme 

Business Psychology Programme 

ABOUT THIS TRAINING COURSE This five-day training course will cover aspects of FPSO operations with an emphasis on management of safety. A background of the methodology used to generate the various safety plans and codes used in the operational safety case will be covered. The course will also review general operational guidelines in the offshore environment to ensure that the operations are completed as designed. This will include offtake operations and maintenance processes for the plant and vessel as well as a session on subsea. Training Objectives To enable participants to obtain an in-depth understanding of FPSO operations, safety and maintenance: * Provide a broad overview of how an FPSO operation is set up and established in the field * Grasp the various methods used to moor the production units * Analyse information and methods required to establish the operation according to local and international regulations. * Assess the methods used to calculate the safety parameters and requirements to construct an approved valid safety case * Explore conditions to monitor during operations with regards to safety and structure * Inspect various types of hazards associated with production and produced materials * Review regular and emergency operational maintenance requirements * Examine cyclones and weather events causing disconnection * Comprehend manning, training requirements and operations including cargo Case studies and Exercises: The training course uses real life examples and case studies to explain the setup, preparation, implementation and operational activities required to successfully complete FPSO operations from a safety and maintenance perspective. This will allow the application of participants' newly-acquired knowledge. Case studies also stimulate independent thinking and discussion among the participants. Case Studies The case studies proposed for this course will include: * A group exercise to consider what is the minimum requirement for the production of a safety case * Generic plan for the development of a maintenance management system using computer software systems (e.g. Amos) * Construction of a UWILD plan to include scope and potential tendering requirements Quizzes The various quizzes can be expanded or arranged to suit the group/interests and topics covered but will generally include the following topics: * Mooring types and location where they are primarily used * Safety cases * Safety management systems * Process hazards and mitigation * UWILD components and regulations * Operations management * Offtake operations Target Audience The course is generally aimed at personnel who are involved in FPSO operations as either offshore crew or onshore support team members. This course will also greatly benefit the following groups but not limited to: * Process engineers * Surveyors * Facility engineers * Naval architects * Operations engineer * Health, Safety, Environment (HSE) specialists and managers * Maintenance engineers Course Level * Intermediate Training Methods The training course is presented in an interactive workshop format that allows for discussion. The course will be delivered through analysis of case studies and running examples of problems. Course Duration: 5 days in total (35 hours) The training instructor relies on a highly interactive training method to enhance the learning process. This method ensures that all participants gain a complete understanding of all the topics covered. The training comprises of information supplemented by visual activities including photographs from various operations and videos of operational and safety activities. Interaction verbally will be necessary to achieve the best learning outcome from the materials. Course timings and breaks  0830 - Registration 0900 - Start of training 1030 - Morning break 1045 - Training recommences 1230 - Lunch break 1330 - Training recommences 1515 - Afternoon break 1530 - Training recommences 1700 - End of training Trainer Your expert course leader has been involved in the Oil and Gas industry for over 28 years in several different roles commencing as a second deck officer on FPSO's and moving through the industry from deck officer to Master, OIM and Field Superintendent. He has also been in charge of semisubmersible and fixed production platforms as field superintendent before moving ashore into senior management roles. On completion of industry specific activities, he moved to teaching roles at South Tyneside Maritime College in the department of marine and simulation and presented live courses to maritime students from cadet to Master.  Prior to returning to Perth in March 2019, he was training manager for a subsidiary of Gaz Transport and Technigaz of France. He has a Master Class 1 certificate with endorsements for hazardous cargoes and a Graduate Certificate in Business Administration as well as multiple course certificates required to operate FPSO's, platforms and semisubmersible facilities. He has been involved in the preparation of national standards for Safety Cases (Australia); Designing and structural setup of competency-based training systems in South East Asia. He was also involved in the development of minimum standards, competency profiles position based and preparation and implementation of training plans to ensure competency in the local staff in Asian operations. He was part of the development team for minimum standards of offshore safety in Australian offshore operations including the implementation of the Common Safety Training Program (CSTP). He was also involved in implementing training plans for both simulator and classroom based courses in LNG operations and cargo tank design and construction. Highlighted work experience: * Premier Petroleum Myanmar Ltd * Petronas Carigali * Newfield Australia (Cartier) Pty Ltd: * FPSO Jabiru Venture * FPSO Challis Venture * Onshore OIM * Australian FPSO Management Pty. Ltd. POST TRAINING COACHING SUPPORT (OPTIONAL) To further optimise your learning experience from our courses, we also offer individualized 'One to One' coaching support for 2 hours post training. We can help improve your competence in your chosen area of interest, based on your learning needs and available hours. This is a great opportunity to improve your capability and confidence in a particular area of expertise. It will be delivered over a secure video conference call by one of our senior trainers. They will work with you to create a tailor-made coaching program that will help you achieve your goals faster. Request for further information post training support and fees applicable Accreditions And Affliations

ABOUT THIS VIRTUAL INSTRUCTOR LED TRAINING (VILT)  Electrification of the transportation sector will impact the power system in several ways. Besides the additional load, local impact on the grid needs to be managed by the grid operators. Simultaneously charging of many electric vehicles (EVs) might exceed the limits in specific locations. On the other hand, EVs can provide flexibility and other ancillary services that will help grid operators. This 3 half-day VILT course will provide a complete overview of integrating electric vehicles (EVs) into the power grid. It will cover the whole value chain from grid operations to the car battery. This includes the control room, possible grid reinforcement, demand side management and power electronics. This course will demonstrate the impact on the grid and solutions for a safe & cost-effective grid plan and operation, with examples of successful integration of EVs. The course will also provide vital knowledge about technology used for EVs such as power electronics, demand side management, communication and batteries. In this context, the focus will be on power electronics as it has the highest impact on the grid. The grid planning tool, pandapower, is introduced as an open source tool for power system modelling. The set-up of the training course allows for discussion and questions. Questions can be formulated by the participants upfront or during the training. This course is delivered in partnership with Fraunhofer IEE. Training Objectives At the end of this course, the participants will: * Understand the charging options for EVs and its impact on the grid and batteries * Identify system services for EVs with regards to voltage quality at the point of common coupling * Discover what are the 'grid friendly' and grid supporting functions in EVs * Uncover the different applications, standards and data researched on EVs * Examine the application of a grid planning tool (pandapower) for power system modelling * Be able to develop code snippets with pandapower * Apply and execute a code example for power system modelling with pandapower Target Audience * EV and grid project developers and administrators * Power grid operators and planners * EPC organisations involved in grid development * EV/ battery manufacturers and designers * EV transport planners and designers * Government regulators and policy makers Training Methods The VILT will be delivered online in 3 half-day sessions comprising 4 hours per day, with 2 x 10 minutes breaks per day, including time for lectures, discussion, quizzes and short interactive exercises. Additionally, some self-study will be requested. Participants are invited but not obliged to bring a short presentation (10 mins max) on a practical problem they encountered in their work. This will then be explained and discussed during the VILT. A short test or quiz will be held at the end of every session/day. Trainer Our first course expert is Head of Department Converters and Electrical Drive Systems at Fraunhofer IEE and Professor for Electromobility and Electrical Infrastructure at Bonn-Rhein-Sieg University of Applied Sciences. He received his engineering degree in automation in 2008 by the THM Technische Hochschule Mittelhessen (FH Giessen-Friedberg). Afterwards he studied power engineering at University of Kassel and received his diploma certificate in 2010. In 2016 he received the Ph.D. (Dr.-Ing.) from the University of Hannover. The title of his dissertation is Optimized multifunctional bi-directional charger for electric vehicles. He has been a researcher at the Fraunhofer IEE in Kassel since 2010 and deals with power converters for electric vehicles, photovoltaics and wind energy. His current research interests include the bidirectional inductive power transfer, battery charger and inverter as well as new power electronic components such as SiC MOSFETs and chokes. Additionally, our key expert is Chairman of the IEEE Joint IAS/PELS/IES German Chapter and a member of the International Scientific Committee of the EPE Association. Our second course expert is deputy head of energy storage department at Fraunhofer IEE. Prior to this he was the Director of Grid Integration department at SMA Solar Technology AG, one of the world's largest manufacturers of PV power converters. Before joining SMA, our course expert was manager of the Front Office System Planning at Amprion GmbH (formerly RWE TSO), one of the four German transmission system operators. He holds a degree of electrical engineering of the University of Kassel, Germany. In 2003 he finished his Ph.D. (Dr.-Ing.) on the topic of wind power forecasting at the 'Institute of Solar Energy Supply Technology' (now Fraunhofer IEE) in Kassel. In 2004 he started his career at RWE TSO with main focus on wind power integration and congestion management. Our course expert is chairman of the IEC SC 8A 'Grid Integration of Large-capacity Renewable Energy (RE) Generation' and has published several papers about grid integration of renewable energy source and forecasting systems on books, magazines, international conferences and workshops. Our third course expert is Research Associate at Fraunhofer IEE. He is actively working on different projects related to the integration of electric vehicle charging into the electric distribution grid. The focus of this work concerns time series based simulations for grid planning and operation in order to investigate the effect of a future rollout of electric vehicles and charging infrastructure on economics e.g. costs for grid reinforcement. He completed his master degree (MSc.) in Business Administration and Engineering: Electrical Power Engineering at RWTH Aachen University, Germany. Our trainers are experts from Fraunhofer Institute for Energy Economics and Energy System Technology (Fraunhofer, IEE), Germany. The Fraunhofer IEE researches for the national and international transformation of energy supply systems POST TRAINING COACHING SUPPORT (OPTIONAL) To further optimise your learning experience from our courses, we also offer individualized 'One to One' coaching support for 2 hours post training. We can help improve your competence in your chosen area of interest, based on your learning needs and available hours. This is a great opportunity to improve your capability and confidence in a particular area of expertise. It will be delivered over a secure video conference call by one of our senior trainers. They will work with you to create a tailor-made coaching program that will help you achieve your goals faster. Request for further information about post training coaching support and fees applicable for this. Accreditions And Affliations

Level Three, the final learning stage of our professional development courses, aims to bring you to the highest standard of advanced detailing skill through the spectrum of; rotary polisher techniques, wet sanding by machine and refinement, a full understanding of SMAT and DAT polishes and compounds and their role in efficiency and correction on different paint types, a wide selection of pads and equipment such as nano polishers and attachments. Mechanical training in wheel removal and jacking on multiple vehicle styles allowing deep cleaning access to vehicle arch and components, and specialist finishes on carbon fibre, GRP and gel coat are examined, demonstrated and explained. Level Three aims to bring you to the highest standard of advanced detailing skill, through the spectrum of rotary polisher techniques, wet sanding by machine, a full understanding of SMAT and DAT polishes and compounds, a wide selection of pads and equipment such as nano polishers and attachments. Mechanical training in wheel removal and jacking on multiple vehicle styles allowing deep cleaning access to vehicle arch and components, and specialist finishes on carbon fibre, GRP and gel coat are examined and explained. • DAT/SMAT technology • Pneumatic polishers and sanders • Advanced Dual Action technique • Rotary machine polishers • Glass polishing • Wheel removal • Under-arch cleaning • Cleaner chemistry • Time management and planning • Trim and seat removal • In-depth interior detailing • Cloth types • Advanced Dual Action technique • Rotary machine polishers • Mini/nano machine polishers • Wet-sanding • Advanced pad types • GRP, carbon and insulative substrates • Badge and trim removal • Texture levelling • Show preparation • Ceramic coatings • Polymer coatings • Coating troubleshooting • Coatings after-care • Fillers and glazes for show finishes • Business management • Business administration • Safe working practices • Safe vehicle lifting - ramp/jacking • Workshop planning • Advanced chemical knowledge • Risk assessments • Gloss meter usage • PPE • Employee management Following completion of training and ongoing assessment, case studies and exercises will lead to the level three exam and, upon grading, award of our advanced detailing Level 3 Detailing. Course Length 3 Days (0930 - 1600) Group Size One-to-One Location UK Detailing Academy, 2 Purlieus Barn, Ewen, Cirencester, GL7 6BY Experience / Qualification Completion of Level 2 Refreshments or Lunch Refreshments included

Launch your Detailing Career on all vehicle types Level One + Motorbike is ideal for those just starting a detailing career, about to enter the detailing industry, or those who wish to reset, update, and refresh their skills, with the addition of a day spent exclusively on motorcycle detailing. The aim is to familiarise the candidate with the processes and maintenance of vehicles from a professional and business view, teaching the foundations of correct vehicle cleaning up to the final familiarisation of entry-level dual-action machine polishers. Business practices and health and safety are explored covering areas such as pricing, marketing, SDS and environmental conformity. This Level 1 Course comes bundled with our One-Day Motorbike extension course at a discounted rate to the bolt-on in isolation, perfect to give you all the knowledge you need to complete a full detail on a motorcycle, including use of paddock stands, fairing removal, mechanical areas, and much more. Alternatively, Level 1 candidates can later book the Learn2 Motorcycle Detailing 1 Day course as a bolt-on, to complete at another suitable time. The aim of Level One is ideal for those just about to, or have recently entered the detailing industry, or those who wish to reset and refresh their skills, with the addition of a day spent exclusively on motorcycle detailing. The aim is to familiarise the candidate with the processes and maintenance of vehicles from a professional and business view, teaching the foundations of correct vehicle cleaning up to the final familiarisation of entry-level dual action machine polishers over the course of 3 days of intense training. Business practices and health and safety are explored covering areas such as pricing, marketing, SDS and environmental conformity. This Level 1 Course comes bundled with our one-day motorbike extension course, perfect to give you all the knowledge you need to complete a full detail on a motorcycle, including the use of paddock stands, fairing removal, mechanical areas, and much more. alternatively, candidates can book the Learn2 Motorcycle Detailing 1 Day course as a bolt-on to an automotive Level 1 Course to complete at another suitable time. Along the way, in addition to the motorcycle training, topics covered will be: * Washing stages * Wash media * Environmental considerations * Drying methods * Bonded contamination and its removal * Wheel care and maintenance * Glass and hard surfaces * Engine bay cleaning * Vulnerable surfaces * Efficiency and process * PPE and safety * Clothing and working practices * Risk assessment * Chemical knowledge * Van set-ups * Interior detailing * Leather and soft surface care * Fillers/glazing * Dual action machine polishers intro * Minor defect identification * Paint types * LSPs * Final presentation * Marketing * Conflict resolution and customer care * Financing * Insurance * Pricing and quotes * Business Administration * Memberships * Social Media * Manual handling * Safe working practices * Pre-work inspection All levels are accompanied by a full course booklet to jog your memory when needed. Practical assessment takes place as part of the original training session, at the end of the course you will be assigned a (manageable) series of case studies and exercises to complete over the period of 3 months to cement the knowledge. There is then a short externally assessed exam prior to the optional commencement of Level Two, to ensure there are no weak areas. After which the Level One accreditation is awarded and you can either progress or choose to practice the skills gained with ongoing support. Course Length 3 Days (0930 - 1600) Group Size One-to-One Location UK Detailing Academy, 2 Purlieus Barn, Ewen, Cirencester, GL7 6BY Experience / Qualification Open to all Refreshments or Lunch Refreshments included

Launch your Detailing Career. Level One Motorbike is ideal for those just about to enter the detailing industry, or those who wish to reset, update and refresh their skills. The aim is to familiarise the candidate with the processes and maintenance of vehicles from a professional and business view for a new detailing career, teaching the foundations of correct vehicle cleaning up to the final familiarisation of entry-level dual-action machine polishers. Business practices and health and safety are explored covering areas such as pricing, marketing, target clientele, SDS and environmental conformity. This is much more than just a 'how to wash a vehicle' course, and gives your business the best possible start, optimising it for success.   The aim of Level One Motorbike is ideal for those just about to, or have recently entered the motorbike detailing industry, or those who wish to reset and refresh their skills with a focus exclusively on motorbikes. The aim is to familiarise the candidate with the processes and maintenance of two-wheeled vehicles from a professional and business view, teaching the foundations of correct vehicle cleaning up to the final familiarisation of entry-level dual-action machine polishers. Business practices and health and safety are explored covering areas such as pricing, marketing, SDS and environmental conformity. The Level 1 Course is available as a motorbike focused, or alternatively our standard vehicle course. Alternatively, candidates can book an additional day on Motorcycle Detailing as a bolt-on to an automotive Level 1 Course here if they would like to learn both sets of skills. Along the way topics covered will be: * Washing stages * Wash media * Environmental considerations * Drying methods * Bonded contamination and its removal * Wheel care and maintenance * Glass and hard surfaces * Engine bay cleaning * Vulnerable surfaces * Efficiency and process * PPE and safety * Clothing and working practices * Risk assessment * Chemical knowledge * Van set-ups * Interior detailing * Leather and soft surface care * Fillers/glazing * Dual action machine polishers intro * Minor defect identification * Paint types * LSPs * Final presentation * Marketing * Conflict resolution and customer care * Financing * Insurance * Pricing and quotes * Business Administration * Memberships * Social Media * Manual handling * Safe working practices * Pre-work inspection All levels are accompanied by a full course booklet to jog your memory when needed. Practical assessment takes place as part of the original training session, at the end of the course you will be assigned a (manageable) series of case studies and exercises to complete over the period of 3 months to cement the knowledge. There is then a short externally assessed exam prior to the optional commencement of Level Two, to ensure there are no weak areas. After which the Level One accreditation is awarded and you can either progress or choose to practice the skills gained with ongoing support. Course Length 3 Days (0930 - 1600) Group Size One-to-One Location UK Detailing Academy, 2 Purlieus Barn, Ewen, Cirencester, GL7 6BY Experience / Qualification Open to all Refreshments or Lunch Refreshments included

Leadership and Management Training; Introductory Management Training; ; Ipswich; Suffolk; Switch Direction; Dan Cocksedge

LAUNCH YOUR DETAILING CAREER. Are you looking to launch a detailing career and need to start on the right foot? Level One is ideal for those just about to enter the detailing industry, or those who wish to reset, update and refresh their skills. The aim is to teach you the foundations of vehicle care from assessment up to entry-level machine polishing, to have a successful and reputable business from the very start. Business practices and health and safety are explored covering areas such as pricing, marketing, target clientele, SDS and environmental conformity. This is much more than just a 'how to wash a car'. It gives your new detailing business the best possible start, optimising it for success and backed with a resource for any issues you may encounter. Complete course guide book, ongoing support and certification exam fee are all included in the cost. The Level 1 Course is available as either this standard vehicle course or alternatively a motorbike-focused course. You can also book the Level 1 + Motorbike course as a bolt-on day, if you wish to cover both aspects and open your target market even further.   Available start dates are highlighted in the calendar below, all days are one-to-one so can be booked to suit your schedule. The aim of Level One is ideal for those just about to, or have recently entered the detailing industry, or those who wish to reset and refresh their skills. the aim is to familiarise the candidate with the processes and maintenance of vehicles from a professional and business view, teaching the foundations of correct vehicle cleaning up to the final familiarisation of entry-level dual action machine polishers. Business practices and health and safety are explored covering areas such as pricing, marketing, SDS and environmental conformity. The Level 1 Course is available as either a car or motorcycle course. Alternatively, candidates can book an additional day on Motorcycle Detailing as a bolt-on to an automotive Level 1 Course here. Modules covered on the course are: * Washing stages * Wash media * Environmental considerations * Drying methods * Bonded contamination and its removal * Wheel care and maintenance * Glass and hard surfaces * Engine bay cleaning * Vulnerable surfaces * Efficiency and process * PPE and safety * Clothing and working practices * Risk assessment * Chemical knowledge * Van set-ups * Interior detailing * Leather and soft surface care * Fillers/glazing * Dual action machine polishers intro * Minor defect identification * Paint types * LSPs * Final presentation * Marketing * Conflict resolution and customer care * Financing * Insurance * Pricing and quotes * Business Administration * Memberships * Social Media * Manual handling * Safe working practices * Pre-work inspection All levels are accompanied by a full course booklet to jog your memory when needed. Practical assessment takes place as part of the original training session, at the end of the course you will be assigned a (manageable) series of case studies and exercises to complete over 3 months to cement the knowledge. There is then a short externally assessed exam before the optional commencement of Level Two, to ensure there are no weak areas. After which the Level One accreditation is awarded and you can either progress or choose to practice the skills gained with ongoing support. Course Length 3 Days (0930 - 1600) Group Size One-to-One Location UK Detailing Academy, 2 Purlieus Barn, Ewen, Cirencester, GL7 6BY Experience / Qualification Open to all Refreshments or Lunch Refreshments included