1801 Courses in Cardiff
The Energy Efficiency (Part L) course empowers gas and oil-fired domestic heating and hot water system designers to comply with Part L of the Building Regulations. Who should attend? * Heating engineers * Design engineers * Building services industry operatives * Anyone looking to self-certify heating installations through Competent Persons Schemes (CPS) Course Objective: * Develop the knowledge and skills to design heating systems that meet the energy efficiency standards outlined in Part L of the Building Regulations. Prerequisites (one required): * ACS qualification * OFTEC qualification * Level 2 or 3 N/SVQ in plumbing (or equivalent) * Level 2 or 3 N/SVQ in heating and ventilation (or equivalent) * Level 2 or 3 N/SVQ in gas installation/maintenance (or equivalent) * Level 2 or 3 N/SVQ in oil-fired technical services (or equivalent) * Previous energy efficiency certificate What you'll gain: * Understand the key requirements of Part L of the Building Regulations for domestic heating systems. * Learn to design heating systems that achieve optimal energy efficiency. * Master the skills needed to self-certify installations through CPS schemes. Benefits: * Stay compliant: Ensure your heating system designs meet current regulations. * Reduce energy consumption: Promote sustainable practices in the industry. * Gain a competitive edge: Offer energy-efficient solutions to your clients. All participants must bring photo ID and a passport-sized photo for the course. Enrol today and become a leader in energy-efficient heating system design!
Calling all plumbers and heating engineers! Take your first step towards becoming an MCS accredited Heat Pump Engineer in just three days!
This course is suitable for Solid Fuel engineers who are looking to re-new their previous certification. Our Initial course is available through this link: https://www.citytraining.com/w/courses/21-solid-fuel-initial Dry - 1 Day Wet - 2 Days Our courses are accredited by OFTEC [https://www.oftec.org/technicians/areas-of-registration/solid-fuel-registration] and certified by Cert-ain [http://www.cert-ain.com/solid-fuel.html], but this does not stop you from renewing or achieving accreditation from HETAS and similar bodies, saving you money on training costs too. What's included? * Dry * OFT15-108(D) - Installation, commissioning, and servicing of solid fuel burning appliances (dry space heating). * OFT18-108(S) - Service, maintenance, repair, or commissioning of solid fuel burning appliances. * Wet * As above [OFT15-108(D) & OFT18-108(S)]. * OFT15-108(W) - Installation, commissioning, and servicing of solid fuel burning appliances with space heating and hot water heating. PREREQUISITES Category 1 - RENEWAL (this course) Applicants in this category are regarded as experienced Solid Fuel technicians holding one of the following - they will need to provide an original certificate as evidence to the Assessment Centre prior to taking OFTEC assessments: * OFTEC * OFT15-108D (category 1 status for OFT15-108D and OFT18-108S) * OFT15-108W (category 1 status for OFT15-108W, OFT15-108D and OFT18-108S) * OFT18-108S (category 1 status for OFT18-108S only) * HETAS * H003 AND H006 (category 1 status for OFT15-108D and OFT18-108S) * H004 AND H006 (category 1 status for OFT15-108W, OFT15-108D and OFT18-108S) * H005 (category 1 status for OFT15-108W, OFT15-108D and OFT18-108S) * H009 (category 1 status for OFT18-108S only) * BPEC * Solid Fuel Installer (category 1 status for OFT15-108W, OFT15-108D and OFT18-108S) * CITY & GUILDS * Level 3 NVQ Diploma in Domestic Plumbing and Heating (6189) - must include Solid Fuel pathway (category 1 status for OFT15-108W, OFT15-108D and OFT18-108S) * Level 3 Diploma in Plumbing and Domestic Heating (9189-03) - must include Solid Fuel pathway (category 1 status for OFT15-108W, OFT15-108D and OFT18-108S) Category 2 (Heating Engineer - Other Fuel) - (Initial Only)Applicants in this category are regarded as holding a nationally recognised qualification in a trade associated with Solid Fuel work; candidates must provide relevant qualifications to support entry: For those looking to expand into Solid Fuel, please visit our Solid Fuel Initial page! * Dry * OFTEC technician with scope of work categories 101,102 or 105E * or - Registered Gas Safe or RGII operative * or - Registered member of GOMCS, APICS, NACS, NIACS, CSAI, ICS, CSA or NACE * or - evidence of formal qualifications: City & Guilds 6129/6035 and 6089, or QCF 6189; * or - (United Kingdom) N/SVQ Level 2/3 in plumbing or equivalent earlier certification that provides evidence of competence * or - (Republic of Ireland) FETAC Level 5 in plumbing * or - HETAS H003 Dry Appliance Installer course * or - BPEC Solid Fuel Installer or Solid Biomass course * or - APHC Installation of Solid Fuel Appliances and Heating Systems Fed by Solid Fuel in Domestic Appliances course * or have relevant qualifications, skills and experience gained from working in a related trade such as Plumbing / Heating / Ventilation / Refrigeration / Air-Conditioning / Gas Fitting or servicing. Applicants must provide evidence of this related experience to the Assessment Centre. The evidence must consist of, as a minimum, the following: * Name and address of the business(s) providing the related experience. * The types of related work undertaken (minimum 4/5 jobs). * Wet * Compulsory: OFTEC OFT15-108D AND * (United Kingdom) - N/SVQ Level 2/3 in plumbing or equivalent earlier certification that provides evidence of competence * (Republic of Ireland) - FETAC Level 6 in plumbing * or - evidence of OFTEC 101 or 105E; * or - evidence of formal qualifications: City & Guilds 6035 and 6089, or QCF 6189; * or - HETAS H004 Wet Appliance Installer course * or - BPEC Solid Biomass course * or - Gas Safe Registered Operative holding a current CENWAT category * or - RGII Registered Operative holding a current GID category All Category 2 candidates must also undertake training at an OFTEC approved training centre. The training must consist of training utilising the current OFTEC Technical Book. The possession of the OFTEC Technical Book prior to training and subsequent assessment is mandatory. Category 3 (New to Industry - Dry Only) - (Initial Only) Applicants in this category are regarded as new to the Solid Fuel industry, and do not hold any national qualifications in a related field nor have any related work experience. Application conditions for this category require that the Category 3 applicant must obtain experience with a business which is willing to provide an auditable extended Solid Fuel training programme incorporating both On and Off the Job components with organisational support prior to the applicant taking OFTEC training and assessment. Evidence of the contents of the programme detailing the Off the Job training and On the Job experience must be presented to the Assessment Centre as above. 4 to 5 jobs are required as a minimum for your portfolio.
Expand your scope and become a Domestic LPG install/service/maintenance/breakdown engineer today! Or, renew your LPG qualifications for a great price whilst improving your skills & knowledge! This course is the ACS LPG Changeover, you will be asked if you require Initial or Renewal at check out.
THIS COURSE PACKAGE INCLUDES: 1: INTRODUCTION TO PHLEBOTOMY COURSE (GPT003) - Level 3 (Ireland Level 5) 2: ADVANCED PHLEBOTOMY COURSE (GPT005) - Level 4 (Ireland Level 6) 3: GEOPACE COMPETENCY CERTIFICATE - CPD Certified (optional with Virtual Classroom) Learn how to take blood ... train as a Phlebotomist FAST-TRACK YOUR PHLEBOTOMY TRAINING WITH OUR COMPLETE TRAINING PACKAGE 20% off - Multi-Course Discount Cover all stages from beginner through to Level 4 Available as Classroom or Virtual Classroom Complete your beginner to advanced training in 2 days Awards 2 accredited qualifications - Introduction to Phlebotomy and Advanced Phlebotomy qualifications Both courses are dually accredited (OCN & CPD) Geopace Certificate of Competency included with classroom attendance or available as an option when booking virtual classroom Covers all steps up to live blood draw Learn advanced skills and techniques Virtual Classroom options include comprehensive Practise@Home Training Kits (yours to keep) Basic understanding of English language required OPEN TO ALL APPLICANTS
Learn how to take blood ... train as a Phlebotomist Nationally Recognised Qualification No previous experience or qualifications needed OCN Accredited - Level 3 (advanced) CPD Accredited (The CPD Certification Service) Covers all steps up to live blood draw Practise on artificial arm and fake blood! Basic understanding of English language required OPEN TO ALL APPLICANTS
Learn how to perform and read an ECG ... Nationally Recognised Qualification OCN Accredited - Level 3 (advanced level) CPD Accredited - The CPD Certification Service Introduces you to the fundamentals of setting up and operating an ECG machine Includes patient preparation Produce a valid (error free) ECG Learn and understand ECG traces Recognise recordings that require urgent attention Basic understanding of English language required OPEN TO ALL APPLICANTS VIRTUAL CLASSROOM OPTION INCLUDES COMPREHENSIVE PRACTISE@HOME ECG TRAINING KIT Final interpretation of all ECG recordings is the responsibility of a medical professional.
